Licence to Operate Elevating Work Platform (Boom length 11m or more)

TLILIC0005 – Licence to operate a boom-type Elevating Work Platform (Boom length 11 metres or more)

This course prepares learners to operate and conduct work activities from an elevating work platform (EWP) with a boom length over 11m. An EWP can be telescopic, hinged, articulated, or a combination of these, used to support a platform from which people, equipment or materials can be elevated to perform work.

Participants will learn how to set-up, operate, shut-down and secure the EWP.

This is a nationally accredited qualification that is recognised in all states and territories of Australia. The course is based on the requirements of the National Standard for Licensing Persons Performing High-Risk Work. Learners who successfully complete the training will become eligible to apply for a High-Risk Work Licence (HRWL).

 

 

Learning outcomes

Students who complete this qualification will gain the skills and knowledge to:

  • Assess ground and environmental conditions applying risk assessment and hazard control strategies to confirm that the site is suitable for EWP use
  • Position, stabilise and set-up the EWP including use of outrigger/stabilisers and packing
  • Operate mobile EWP following best practice
  • Operate an EWP including lifting and elevating using hand-eye coordination
  • Retract, lower, stow and secure the EWP boom
  • Coordinate and communicate with others
  • Park, switch off and isolate the EWP appropriately and safely and carry out post-operational checks
  • Identify problems and equipment faults and where practicable demonstrate appropriate response procedures

 

HIGH RISK COURSE: MUST BE 18 YEARS OR OLDER TO ENROL

Participants are required to:

  • Read the learner guide and complete the review. The learner guide will be provided following enrolment
  • Bring photo ID on the day of training
  • Wear appropriate PPE: Safety boots, hi-vis shirt/vest and hard hat.

Prerequisites and/or Recognition of Prior Learning (RPL)

There are no prerequisites for this course. No RPL can be applied to this course.

HIGH RISK COURSE: MUST BE 18 YEARS OR OLDER TO ENROL

Participants are required to:

  • Read the learner guide and complete the review. The learner guide will be provided following enrolment
  • Bring photo ID on the day of training
  • Wear appropriate PPE: Safety boots, hi-vis shirt/vest and hard hat.

Prerequisites and/or Recognition of Prior Learning (RPL)

There are no prerequisites for this course. No RPL can be applied to this course.

Click here for pricing information

Cancellation fees may apply, please see Learner Information page for terms and conditions.

A range of assessment methods will be used to assess that the learner can:

  • Accurately record and maintain information relating to EWP operations
  • Assess ground and environmental conditions accurately
  • Enter and exit the EWP correctly
  • Position, stabilise and set-up the EWP including use of outrigger/stabilisers and packing
  • Maintain safe operating speed in relation to the conditions
  • Conduct work activities from an EWP
  • Operate and control an EWP including all functions to their maximum extension within the safe working (rated) capacity
  • Conduct and apply hazard identification and risk elimination or minimisation strategies
  • Carry out operational checks on the EWP

National units of competency covered

TLILIC0005 – Licence to operate a boom-type Elevating Work Platform (Boom length 11 metres or more)

Recognition

Students who satisfactorily complete all course requirements will be eligible to receive a Statement of Attainment issued by CEPUTEC (RTO 4612), which is recognised nationally under the Australian Qualifications Framework.

Successful completion of this course may result in becoming eligible to apply for a High-Risk Work Licence (HRWL).  More information below.

WorkSafe QLD

 

Upcoming

Read this before you enrol.

Contact us for information about arranging training delivery at your workplace/worksite.

Other courses

Provide First Aid

Learn the practical skills and theory required to perform CPR in line with the Australian Resuscitation Council (ARC) guidelines and first aid procedures for several conditions such as allergic reactions, burns, cardiac arrest, choking, fractures, poisoning and shock.

Learn More

Provide CPR

This unit introduces learners to the theory and the practical skills required to provide cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.

Learn More

What is a Unique Student Identifier (USI)?

If you study any Nationally Recognised Training in Australia, you are required to have a USI. Your USI links to an online account that contains all your training records and results (transcripts) that you have completed since 2015.

When applying for a job or enrolling in further study, you will often need to provide your training records and results (transcript). The benefit of the USI is the ability to provide learners with easy access to their training records at any time.

You can access your USI account online from your computer, tablet or smart phone.

If you do not already have a USI, go to www.usi.gov.au/students/create-your-usi/ on a computer or mobile device.

Note: A USI must be supplied to CEPUTEC during enrolment so that a Nationally Recognised Qualification or Statement of Attainment can be issued to you.

For further information, please see the video under Learner Resources.